inpotron Newsletter
UPS + battery charger
Note
The illustrated products are not for sale.
This is a selection of customer-specific developments, to illustrate the different possibilities and multitude of
tailor-made solutions that our company has to offer.
Let us offer you the right solution!
PSU-0252-03
- Building technology: fire detection systems, alarm systems
- 72 watt wide range switch mode power supply for DIN rails
- Switchable: 12V or 24V batteries
- UPS function and temperature-controlled for externally connectable lead gel batteries
- Low voltage battery disconnect
- Signal output - battery mode
- 1 output, controlled and current limited
- Power efficiency = 86%
- EMC-Class B
- Ta = -20 - 60°C
- EN 61000-6-3 / -4, EN 61000-6-1 / -2
- International approval EN60950, CSA NRTL, CB scheme
PSU-0651-02
- Healthcare: Mobility aids / drives for wheelchairs
- 78 watt wide range switch mode power supply for installing on the floor
- Break-proof PCB-ABS housing with stand-by LED and decorative foil, 2x output cable for simultaneous charging of 2 batteries
- Protection class IP54, cables fed in from below, protected against spraying water
- Approval for use in medical technology
- UPS function and temperature-controlled charger for LiIon accumulators
- 1 output, controlled and current limited
- Power efficiency = 86%
- EMC-Class B
- Ta = -0 - 50°C
- EN 61000-6-3 / -4, EN 61000-6-1 / -2
- International approval EN60950, EN60601-1-2, CSA NRTL, CB scheme
PSU-1054-01
- Industry: IPC power supply
- 85 watt DC-DC converter, input 15-30V
- Open frame module for integrating in device
- UPS function and temperature-controlled charger for
24V lead gel accumulator
- Electronic rushin current limiter and polarity reversal protection
- 3 Uout +5.1V / 12.2A, +12V / 1.4A, +12V stby / 0.5A, controlled and current limited
- 3 control/status signals (power fail, power supply On/Off, battery Off)
- Power efficiency ≥ 85%
- Ta = -20 - 70°C
- EMC-Class B
- EN 61000-6-3 / -4, EN 61000-6-1 / -2
- International approval EN60950
PSU-1062-03
- Logistics/Industry: Mobile PC terminals
- 120 watt DC-DC converter, input 9 - 63V ( 1 : 7 )
- Open frame module for integrating in aluminium die cast housing
- UPS function
- Electronic rushin current limiter and polarity reversal protection
- +12V / 10A, +12V stby / 0.1A, controlled and current limited
- Power efficiency = 89%
- Ta = -20 - 75°C
- EMC EN55011, EN55022, Class B
- EN 61000-6-3 / -4, EN 61000-6-1 / -2
- International approval CSA - NRTL EN60950, UL60950, type-tested
PSU-3231-01 / -02 / -03
- Logistics/Industry: Mobile PC terminals
- One model equipped with integrated heating foil
- 65 watt DC-DC converter, input 24-48V, 35 watt battery mode
- Complete unit including batteries and wiring in the aluminium die cast housing
- UPS function and temperature-controlled charger for 24V lead gel battery
- Protection Class IP 65
- Control input battery ON + signal output battery mode
- Electronic rushin current limiter and reversal polarity protection
- Uout controlled and current limited
- Low voltage battery disconnect and reversal polarity protection
- Power efficiency = 80%
- Ta = -20 - 50°C
- EMC EN55011, EN55022, Class B
- EN 61000-6-3 / -4, EN 61000-6-1 / -2
- International approval IEC 60950, EN6950, UL60950, type-tested
